Most evenings this week have been about the build of the car. I have
1) installed the oil breather system (worth reading the Build tips as this is not straight forward)
2) move the 7 infront of the grille on the noce cone (see the build tips section for some pictures)
3) installed the Fuel Tap (again there are some pictures and instructions on the Build tips section)
4) Installed a power supply socket to the boot
5) Sealed the boot with aluminium tape and fire sealant
6) added the padding to the roll cage
7) installed the second mirror to the drivers side windscreen stantion (and removed the door mirrors)
8) adjusted the wrist restraints ready for use (I may try them at donnington)
9) Fitted the upgraded front brake pads
10) finished the plastic bolts for the rear wing (only had the passenger side to do as i had already fitted the drivers side when I fitted the side impact bar)

All in all a busy week which means that the car is very nearly ready for track. I need to decide on the seat, get the HANS device fitted and get teh flat floor setup done (but will find out about that in more detail tomorrow as we are off to Caterham for a talk on Setting up the car). 



Leave a Reply.